Back To Listings RSS Print

Sony notes, 7 Oct 2008

Tidbits from the VMI show

By Adam Wilt | October 08, 2008

The business end of the HVR-Z5.

There were a couple of unexpected surprises at VMI's mini-Sony show today in Sunnyvale, CA. While the HVR-S270 and PMW-EX3 camcorders, the PMW-EX30 SxS recorder/player, wireless mics, and LCD displays were the main attractions, Sony also fetched along one of three prototype HVR-Z5 camcorders currently in the USA, as well as a fiber-connected studio setup for the EX3. I also saw the B4-mount lens adapter for the EX3.

The HVR-Z5 with CF card adapter docked on the rear.

The HVR-Z5 was introduced at IBC in Amsterdam, and its first major showing in the USA will be at DV Expo in Los Angeles in a month's time, but the Sony folks gave us a sneak peek. It's functionally like a Z7 with a fixed, 20x zoom with free-spinning focus, zoom, and iris rings. The wide angle is 29.something mm 35mm SLR equivalent, and it should be shipping in December at "under $5000 list price".

Is it just me, or does it look a lot like a Canon XH A1?

Also shown was a fiber-optic studio rig for the PMW-EX3 built by Nipros in Japan and soon to be delivered in the USA by Sony as a package deal bundled with an EX3 for around $29,000.

The Nipros rig uses a sled adapting the EX3's native connections (including its remote control port) to fiber, conveying HD-SDI, control, intercom, and return video up to 2 km (1.2 miles) to the base station.

The EX3 end of the Nipros rig. Fiber port is on the other side.

It includes the sled, the base station, a 3.5" monitor for returned video, two intercom headsets, and all the short BNC and remote cables needed to connect the EX3 to the sled. The fiber cable is extra, and is available in lengths from 50m up to 2km.

The Nipros CCU / Fiber Base Station.

When it's delivered, it'll support full operability of the EX3 using the Sony RM-B150 or RM-B750 remote panels, including (on the 750) video display with superimposed EX3 menus. Sony will sell it only in a bundle with the EX3, but in response to audience questions, the Sony rep said you could probably arrange to buy the bundle now, take delivery of the EX3 now, and then get the Nipros rig when it ships in the next couple of months (assuming I remember the timeframe correctly).

Also shown: the B4 (2/3") lens adapter for the EX3:

The EX-B4 adapter with 12-pin lens data port.

The B4 adapter allows both hot-shoe and separately-cabled 2/3" lenses to talk to the EX3, so start/stop and various other lens functions can be communicated to the camera's CPU (functionality depending on the lens, of course).

It's about $1900. Not cheap, but if you need it, you need it.

Other observations:

  • The EX30 deck, with takes two SxS cards, is pretty cool. It's only half as deep as a "normal" deck, and uses a separate wall-wart power supply (like the EX1 and EX3). It has HD-SDI in and out, making this the cheapest full-HD deck available with uncompressed baseband input. It also has HDMI, analog component, composite, and Y/C outputs. Cost? $4900. No proper jog/shuttle, though.

  • Sony's 24 inch BVM-series LCD looks mighty nice, as it should for $21,500. LED backlighting, deep blacks.

  • The LMD-series LCDs are less impressive. The 24" especially is still lacking in black depth, and in consistency with changes in viewing angle. The 42" was better (and it's big), but it's not as good as the BVM—but at $9300 (list) with an HD-SDI input card, it's a lot cheaper!

  • The version 1.11 firmware upgrade for the EX1 is now available; it adds support for 32 GB SxS cards, the PHU-60K 60 GB hard disk unit, and 23.98PsF E-E output on HD-SDI. It costs $100 (plus shipping) and requires that the EX1 be returned to Sony; contact your local Sony service center for details.

Editor's Choice
PVC Exclusive
From our Sponsors

Share This

Back To Listings RSS Print

Get articles like this in your inbox: Sign Up


jimhurwitz: | November, 05, 2008


I just wanted to remind you that the CopperHead system is the original Fiber Optic link for EVERY professional camcorder. It mounts instantly to the EX3 when used with either the Zacuto sled or the new Anton/Bauer QR-EX3. 

This is the same CopperHead we’ve been selling and shipping for seven years.  All camera signals, camera control, intercom, etc is carried bidirectionally on a fiber cable.  Choice of Tactical fiber cable (local power) or SMPTE Hybrid fiber/copper cable. (remote power). 

There are two excellent mounting solutions on the EX3 for the CopperHead camera unit:
1) Anton/Bauer: Anton/Bauer has introduced a new Gold Mount adaptor for the EX3.  See:  The .CopperHead will fit on that, but it might get a bit unwieldy. 

2) Zacuto:

I like this solution better.  On the tripod, it gives you rods for mounting big lenses, matteboxes, prompter, etc.  But when it snaps off of the tripod, it goes right on to the shoulder and balances the little EX3 on the operator’s shoulder like a “real” camcorder, with the battery and CopperHead behind the shoulder for a counterbalance.  The pictures on the website don’t show the shoulder mount… but will by the end of next week (new photos being taken).

Whichever way that you choose to mount it, there are several reasons that the CopperHead is a better choice than the “Nippros” system that Sony is bundling:

1) CopperHead allows the camera to go hand held with fiber.  This is important for productions like like live music and sports. 

2) Smaller, lighter camera unit. 

3) Tactical and SMPTE hybrid fiber options.

4) When you upgrade to bigger and/or better cameras from Sony or any other manufacturer, the CopperHead system goes with them.  It is camera “agnostic.”

5) Lots of systems on the street in case you need to rent supplemental gear.

6) Trusted product, made in USA, with seven years of street cred. 

7) It’s from Telecast, the leader in fiber optics for television production. 

Let me know if you have any other questions.  You can learn more about CopperHead at:


Jim Hurwitz
Product Manager, Camera Systems
Manager, Western U.S.
Telecast Fiber Systems, Inc. 
.(JavaScript must be enabled to view this email address)

Please login or register to comment