Click Here

(Page 1 of 1 pages for this article )

Monday, December 26, 2011

Filed under: *VIDEO*CamerasGentryMedia Sister SitesProVideo CoalitionProduction

Sony’s FS100 camera to become “WorldCam” via free firmware update

Allan Tépper | 12/26

image

Sony USA has just officially announced that the (so-far) segregated 59.94Hz FS100 camera (officially known as the NEX-FS100, often followed by a regional suffix, and then sometimes by the letter “K” to indicate that it is a kit, packaged with a lens) is about to go “WorldCam” via a free firmware update sometime at the beginning of 2012. “WorldCam” is a term used to indicate that a camera has the necessary framerates to be used worldwide, similar to an unlocked quad-band GSM phone that I have used for more than a decade to travel internationally without roaming charges. Beyond using a camera worldwide, having a WorldCam camera is also helpful when a producer needs to acquire content to be broadcast primarily in another country which uses a different framerate. This article will cover the novelistic history of the FS100’s uncertain potential capacity to become WorldCam, as well as some other improvements included in the upcoming firmware update… and some other improvements that are still missing.

In the recent past, higher-priced Sony HD professional cameras including the HDCAM, HDCAM-SR, XDCAM-EX, and XDCAM-HD lines have all been shipped WorldCam as standard. The third generation professional Sony HDV cameras were shipped as segregated, but were optionally upgradable to WorldCam for US$300 in the USA, as I covered back in 2009 in Sony upgrades 3G HDV camcorders to universal, for a small fee. As explained in my 2008 article When 25p beats 24p, because of the fact that the 23.976p workflow was so cumbersome back in the HDV tape days, some USA producers chose to produce in 25p and then deliver 23.976p. Fortunately, most of the problems associated with 23.976p workflows have disappeared with the arrival of cameras that shoot 23.976p natively (without pulldown) onto solid state media. However, there is still a need for WorldCam cameras for international shoots, as I covered in Panasonic AF100 joins forces with Sony encoder for 25p Euro spot in Miami. In that June 2011 article, director Rubén Abruña explained why he chose the Panasonic AF100 over the Sony FS100 for that production:

“The two candidates were the Panasonic AF100 and the Sony FS100. Obviously, the Sony FS100’s Super35mm sensor is mathematically more appropriate and more efficient for 16:9 capture than the Micro Four Thirds sensor in the Panasonic AF100. I would have really loved to have been able to compare them side-by side, but Sony made the decision for us because the FS100 simply wasn’t available on time for this production. So we used the Panasonic AF100, which fortunately comes standard as ‘WorldCam’. But ironically, Sony was involved in many of the scenes, by virtue of the fact that we recorded many of them on the nanoFlash recorder from Convergent Design, which uses a ‘Beyond XDCAM-HD’ encoder manufactured by Sony. I call it ‘Beyond XDCAM-HD’ because it has the same 4:2:2 encoder technology used in cameras like the US$42,000 Sony PDW-F800 camera, but fortunately breaks the 50 megabit/second limitation of the F800 and allowed us to record 4:2:2 at 140 megabits/second. I am very happy with the motion pictures we’ve been able to create with the AF100 together with the ‘Beyond XDCAM-HD’ Sony encoder in the nanoFlash recorder. Having said that, I will strongly consider the FS100 for future projects, but only when Sony can offer a WorldCam version of it. The fact that we produced this spot in 25p in Miami for Europe should make it clear that production today is global, and Sony shouldn’t expect us to purchase two separate camera bodies just to cover 50Hz and 59.94Hz framerates.”

Apparently, Sony read Rubén’s explanation here in ProVideo Coalition magazine, and likely that of many other concerned producers and directors. Just prior to that, Adam Wilt had reported from CineGear:

According to Sony’s Juan Martínez at Cine Gear, the FS100U (US model) is not upgradeable to WorldCam 50/60Hz compatibility; the hardware won’t support it. To shoot 50 Hz formats, you’ll need the FS100E (European) model instead.

Almost immediately after that, I received word from a very trusted CI (confidential informant) that I should set the FS100 (and even the NX70) WorldCam status back to “Unconfirmed” until further notice, which I did in Untapped features in Sony NXCAM’s new HDMI output back in June 2011. Now, perhaps as a December holiday present from Sony, we just heard the good news about the upcoming free firmware upgrade for the FS100 which makes it WorldCam, among some other improvements:

1.  Added 50Hz recording system (PAL): 1920x1080 50p, 50i, 25p and 1280x720 50p.

2.  Camera Profile (camera settings can be saved to and loaded from a memory card).

3.  Additional 4x and 8x Expanded Focus magnification: (with user selectable focus area).

4.  Selectable ISO or GAIN sensitivity display.

5.  Selectable Focus indication in FEET or METERS (E-mount lens only).

6.  Selectable Shutter indication as EXPOSURE TIME or SHUTTER ANGLE.

7.  Added the following Aspect-Ratio markers: 2.35:1, 1.85:1 and 1.66:1.

8.  Display ON/OFF button enables Zebra and/or Histogram overlay onto video output.

9.  Compatible with the new A-Mount to E-Mount adaptor, model LA-EA2. One push Auto-IRIS and continuous 15-point, Phase-Detection Auto-Focus operation with most Alpha A-Mount lenses is available. Lens metadata is displayed onscreen and stored real-time to image file.

Listed features and specifications may change before the actual upgrade release.

Pending improvements for the FS100 not yet announced by Sony

See my recent Open letter to professional AVCHD manufacturers, since none of those requests have yet been announced by Sony (or by Canon or Panasonic).

Don’t miss a single article

To make sure you’re up to date on my upcoming articles, sign up for my free mailing list.

Allan Tépper’s books, consulting, articles, seminars, and audio programs

Contact Allan Tépper for consulting, or find a full listing of his books, articles and upcoming seminars and webinars at AllanTepper.com. Listen to his TecnoTur program, which is now available both in Castilian and in English, free of charge. Search for TecnoTur in iTunes or visit TecnoTur.us for more information.

FTC disclosure

None of the manufacturers listed in this article is paying Allan Tépper or TecnoTur LLC specifically to write this article. Some of the manufacturers listed above have contracted Tépper and/or TecnoTur LLC to carry out consulting and/or translations/localizations/transcreations. Many of the manufacturers listed above have sent Allan Tépper review units. So far, none of the manufacturers listed above is/are sponsors of the TecnoTur programs, although they are welcome to do so, and some are, may be (or may have been) sponsors of ProVideo Coalition magazine. Some links to third parties listed in this article and/or on this web page may indirectly benefit TecnoTur LLC via affiliate programs.

Copyright and use of this article

The articles contained in the TecnoTur channel in ProVideo Coalition magazine are copyright Allan Tépper/TecnoTur LLC, except where otherwise attributed. Unauthorized use is prohibited without prior approval, except for short quotes which link back to this page, which are encouraged!

(Page 1 of 1 pages for this article )

               



You must be registered to comment. This is an effort to reduce spam. Please REGISTER HERE.

I can’t wait for the FS100 to get its firmware update.  The feature I’m the most excited to test is the phase detection autofocus when paired with the LA-EA2 adapter.

I’m very curious to find out if iris changes will be smoother than on the LA-EA1 adapter, which is not smooth at all an over-stops to and fro with each change and can’t be used while recording.

The FS100 made my Vancouver Video Production Blog list of Top 5 Video Production News Stories of 2011: http://bit.ly/rJev0g

Posted by Vancouver Videographer  on  01/02  at  09:37 AM


hi
i want to know if the firmware will be available for BOTH NTSC and PAL cameras or just for the PAL cameras?
As far I know regarding the forum I visited, the PAL version it will have its firmare update by March 2012, but doesn´t say anything about the NTSC version.

I am thinking to buy this camera, but only in case the NTSC version can became ´world camera” as well.
thanks

Posted by .(JavaScript must be enabled to view this email address)  on  01/17  at  08:13 PM


Name:

Email:

Location:

URL:

Smileys

Remember my personal information

Notify me of follow-up comments?

Submit the word you see below:




How to get the “24p” look for your live-switched multicam shoot
Avid now lets you edit video on your iPad for US$4.99. Should you?
AJA’s Io XT w/ Thunderbolt is now available, but it is not Riker: What’s the cover-up?
Pegasus Thunderbolt RAID5 from PROMISE
Can a professional really use Premiere Elements 10?
PsF’s missing workflow, Part 9: Premiere Elements 10
Sony’s FS100 camera to become “WorldCam” via free firmware update
Sony’s NX70 camera to receive its missing 29.97p framerate via free firmware update
PsF’s missing workflow, Part 8: ClipWrap to the rescue
PsF’s missing workflow, Part 7: Adobe Premiere Pro CS5.5.x
PsF’s missing workflow, Part 6: Tépper asks the camera manufacturers…
PsF’s missing workflow, Part 5: Átomos hires a stripper!
PsF’s missing workflow, Part 4: file-based HD video recorders
PsF’s missing workflow, Part 3: Sony’s AVCHD & NXCAM cameras
PsF’s missing workflow, Part 2: the Canon XA10 camera
PsF’s missing workflow Part 1: BENIGN PsF versus MALIGNANT PsF
Mac Mini for pro video editing: a field report from Guatemala
DaVinci Resolve training at Staff/HDTV in Guatemala
Blackmagic breaks Thunderbolt price budget with US$299 Intensity Extreme
AJA announces Io XT interface with Thunderbolt at IBC in Amsterdam
Matrox adds optional Thunderbolt connectivity to existing MXO2 family interfaces
Blackmagic delivers its first Thunderbolt-based i/o interface, the UltraStudio 3D
Relief after Apple’s segregation of keyboards in the USA
Roland QUAD-CAPTURE: the little sister of the OCTA-CAPTURE
Why FCP X’s secondary monitor should be 1920x1200, not 1920x1080
Apple USA unfortunately segregates Mac Mini’s keyboard options
Mac Mini w/Thunderbolt: preferred platform for many new editing systems
Review: Roland OCTA-CAPTURE 8/10-channel USB 2.0 audio interface
Adobe & Avid attract FCP-defectors with special discounts
FCP7 back for Enterprise/new features for FCPX within weeks







HPA Tech Retreat, Day One

Terence Curren | 02/15

Snowflakes In The Desert?

image

Welcome to Indian Wells, an offshoot of Palm Springs, CA. So why is the first day’s “Super Session” titled “

Anton/Bauer Provides Rock-Solid Dependability For “The Amazing Race” As It Treks Across The Globe

PVC News Staff | 02/06

The Amazing Race uses Anton/Bauer to ensure all cameras have enough power to capture every exciting moment the contestants encounter.

image

Since their first day of production back in 2001, crew members of the hit reality television series “The Amazing Race” have counted on Anton/Bauer® products to power them through…

Quick Look: Sony F65 4K Digital Cine Camera

Adam Wilt | 01/28

BandPro’s Jeff Cree shows off the F65 at Videofax in San Francisco.

Last week, San Francisco rental house extraordinaire Videofax took delivery of Sony F65 #15, and on Thursday BandPro’s Jeff Cree came up to show off the camera to local DPs, ACs, and DITs. I was able…

Sony’s NX70 camera to receive its missing 29.97p framerate via free firmware update

Allan Tépper | 12/24

29.97p is a vital framerate for producers in ex-NTSC countries. I’m glad Sony has recognized this fact and is finally adding it to the NX70.

image

Sony has just announced that the NXCAM camera model known officially as the HXR-NX70 (often followed by a regional suffix) —but colloquially known simply as the NX70— will…

To be considered for listing, contact pr (at) provideocoalition (dot) com


Copyright © 2011, HD Expo, LLC a division of Diversified Business Communications. DBA Createasphere

All rights reserved. HD EXPO, High Def EXPO, Createasphere, E-Tech, Entertainment Technology Exposition, 3D Production Workshop, VariCamp, P2 Camp, ColorCamp 101, and Lighting, Filters & Gels for HD are all trademarks of HD Expo, LLC.

Terms of Use  |  Privacy Policy

Check PageRank