Friday, February 10, 2012

How to get the “24p” look for your live-switched multicam shoot

Allan Tépper | 02/10- 04:23 PM

A contracted article, sponsored by Datavideo Corporation.

image

Our friends at Datavideo recently asked me to write an article called How to get the “24p” look for your live-switched multicam shoot. The article covers many factors involved in accomplishing that goal, including framerate, aperture, shutter speed, depth of field, and menu settings in Datavideo’s digital HD video mixers (“switchers”) and recorders, and also the menu settings in several pro cameras from Canon, Panasonic, and Sony. The included chart explains which of the cameras have a direct HD-SDI output, and which require an optional converter to go from HDMI to HD-SDI to connect to the Datavideo digital HD video mixer. As you’ll see in the article, the approach is quite different from the workflows I normally cover, which are more appropriate when programs are to be edited, as opposed to when they are shot —and potentially broadcast— live. The graphics for this article were done by Victory Elliot of Datavideo Corporation.

more »

Thursday, February 09, 2012

Gear In 60 Seconds – Nauticam NA-60D

Matt Jeppsen | 02/09- 11:53 AM

Getting watery trick shots with this DSLR housing

image

Here’s another FreshDV Gear in 60 Seconds video, on the Nauticam NA-60D housing for Canon 60D DSLR stills & video. In this case, we used the housing to get some wild trick shots for a short narrative film. Watch me jump off a waterfall in the video below…

more »

Tuesday, January 31, 2012

Marshall Debuts the Orchid, OR-2410

Clint Milby | 01/31- 11:59 PM

Grade 1 Monitor Delivers Extreme Color Accuracy On Set

Due to changes in camera technology, it’s now become possible to colorgrade on set instead of having to transfer it to another facility. Many DIT’s are using systems that empower cinematographers to apply the 3D color space on set.

more »

Tuesday, January 31, 2012

AJA’s Io XT w/ Thunderbolt is now available, but it is not Riker: What’s the cover-up?

Allan Tépper | 01/31- 07:23 PM

Why are William Riker and Leo Laporte involved in a Pegasus cover-up?

image

AJA is now shipping its US$1495 Io XT, AJA’s first Thunderbolt device which I covered in detail when it was first announced in September 2011. Some of you have asked me whether the Io XT is the same as the prototype code-named “Riker” product that AJA showed at NAB back in April 2011. The answer is no. This article will explain why the Io XT is not Riker, review the currently-available Thunderbolt audio/video i/o devices I’ve covered so far (including the Pegasus Thunderbolt RAID), and clarify William Riker’s involvement in the Pegasus cover-up, as well as that of Leo Laporte, who recently declared Thunderbolt to be “D.O.A.” and “too late” on MacBreak Weekly. Even though neither is true, I think Leo had a very good reason to say those things.

more »


Advertisement


Tuesday, January 31, 2012

Pegasus Thunderbolt RAID5 from PROMISE

Allan Tépper | 01/31- 05:28 PM

The high-performance video RAID5 you need for today’s modern Mac-based video editing systems

image

As many ProVideo Coalition readers may recall, I have written about disk arrays from PROMISE before, although the last time it was primarily to be used with a computer with an eSATA port. Now that all Mac computers (except for the MacPro tower) use a Thunderbolt port, many are looking for a disk array which will have the appropriate connection and that will be at least as fast as what they got previously with eSATA. In this article, you’ll find my results with the Pegasus from PROMISE, used both with a Mac Mini and a MacBook Air. You’ll also find PROMISE’s official position on journaling or non-journaling with this device, since this was not previously documented anywhere to my knowledge.

more »

Sunday, January 29, 2012

Stereo 3D Video Production with GoPro

Jeff Foster | 01/29- 02:15 AM

Using the GoPro HD Hero2 and the 3D Hero System with CineForm Software

Whether you love it or hate it, 3D Stereography is here for awhile. And if you’re totally into it like I am, you quickly realize that there are few turnkey workflows out there to capture and process 3D Stereo video that’s easy to setup, shoot and edit Stereo pairs. Sure, there are a lot of high-end (expensive to rent) systems for two cameras to shoot, software to sync/mux the footage and rigs you can build to edit it, but GoPro has brought it together with a fun and easy-to-use system that anyone can use.

more »

Friday, January 27, 2012

Tangent Element panels are now shipping

Scott Simmons | 01/27- 01:55 PM

DaVinci Resolve isn’t listed as being supported as of yet. Hopefully soon.

image

Word came out today from Tangent Devices that the first Element panels are now shipping. If you don’t remember the Element is Tangent’s newest color grading control panel that uses a modular design that is four separate pieces that can be purchased separately. They are designed to work together to make a more full featured panel than the Wave with trackballs and rings, knobs and buttons and transport controls if the buyer so desires. As for supported applications, Assimilate SCRATCH and Apple Color are two more common applications on the list but the one many people are asking about, DaVinci Resolve, is (so far) missing.

more »

Monday, January 23, 2012

Basic Lighting Setups for Green Screen

Jeff Foster | 01/23- 11:05 PM

from the “Green Screen Workshop: The Setup” series

There’s more to lighting your green screen than just sticking some green fabric up on a wall behind your talent and hoping for the best! Planning ahead and choosing the right setup for the shot you’re hoping to get is a key factor in determining what kind of lighting setup you’re going to require. Will it be in a studio? On-location? Indoors or outdoors? Full-length with walk-ons or just a talking head? Will your actors be making contact with the screen? These are all questions covered in this video lesson from my Green Screen Workshop series - this is a FREE video lesson, so enjoy!

more »

Page 1 of 57 pages  1 2 3 >  Last »


Advertisement




2D Footage with a Stereo 3D Rig in After Effects CS5.5
Jeff Foster

Edit and Optimize 2D Stereo Pairs from a 3D Video Camera or Twin Cameras with a Modified Stereo 3D Rig in After Effects CS5.5

How to get the “24p” look for your live-switched multicam shoot
Allan Tépper

A contracted article, sponsored by Datavideo Corporation.

Gear In 60 Seconds – Nauticam NA-60D
Matt Jeppsen

Getting watery trick shots with this DSLR housing

Any Way You Want It
Mark Spencer

Setting Up a Rig in Motion 5 on MacBreak Studio

Editing with Final Cut Pro X
Mark Spencer

7 Professional Editors Share Their FCP X Experiences

Another week in After Effects
Rich Young

A news roundup

Redrock Micro’s ultraCage for the C300
Clint Milby

New Cage Fits New Camera Like A Glove

Q and A with Bunim/Murray’s Mark Raudonis about their recent Avid switch
Scott Simmons

If you haven’t heard they have moved from FCP7 to Media Composer

Kicking the tires on the Final Cut Pro X 10.0.3 Multicam update
Scott Simmons

The ease of setup and managing multicam clips makes this the best FCPX update yet

25 Camera Angles in 25 Minutes
Mark Spencer

Multicamera Editing in Final Cut Pro X

Expression Shorts - Numerical Readout
David Torno

Create numerical readouts for use in HUD style graphics.

If You Make Your Living In Post, Don’t Miss The HPA Tech Retreat
Terence Curren

The best event for keeping up to speed in the post production world.







2D Footage with a Stereo 3D Rig in After Effects CS5.5

Jeff Foster | 02/10- 06:09 PM

Edit and Optimize 2D Stereo Pairs from a 3D Video Camera or Twin Cameras with a Modified Stereo 3D Rig in After Effects CS5.5

Adobe included a 1-step option to create a 3D Stereo Camera Rig in After Effects CS5.5, to everyone’s enthusiasm for a simpler workflow in 3D space. Great if you are working in 3D space in After Effects, but what about an easy option for 3D Stereo pairs captured by a 3D camera or twin cameras on a rig? In this tutorial I’ll show you how to quickly modify the Stereo 3D Rig in After Effects to quickly mux your L&R video files and adjust the convergence for anaglyph, interlaced or stereo pairs output.

image

How to get the “24p” look for your live-switched multicam shoot

Allan Tépper | 02/10- 04:23 PM

A contracted article, sponsored by Datavideo Corporation.

Our friends at Datavideo recently asked me to write an article called How to get the “24p” look for your live-switched multicam shoot. The article covers many factors involved in accomplishing that goal, including framerate, aperture, shutter speed, depth of field, and menu settings in Datavideo’s digital HD video mixers (“switchers”) and recorders, and also the menu settings in several pro cameras from Canon, Panasonic, and Sony. The included chart explains which of the cameras have a direct HD-SDI output, and which require an optional converter to go from HDMI to HD-SDI to connect to the Datavideo digital HD video mixer. As you’ll see in the article, the approach is quite different from the workflows I normally cover, which are more appropriate when programs are to be edited, as opposed to when they are shot —and potentially broadcast— live. The graphics for this article were done by Victory Elliot of Datavideo Corporation.

To be considered for listing, contact pr (at) provideocoalition (dot) com


Copyright © 2011, HD Expo, LLC a division of Diversified Business Communications. DBA Createasphere

All rights reserved. HD EXPO, High Def EXPO, Createasphere, E-Tech, Entertainment Technology Exposition, 3D Production Workshop, VariCamp, P2 Camp, ColorCamp 101, and Lighting, Filters & Gels for HD are all trademarks of HD Expo, LLC.

Terms of Use  |  Privacy Policy

Check PageRank