| |
|||||
 |
|||||
(Page 1 of 2 pages for this article 1 2 >) Filed under: Editing •Post Production •Software • Automagic part I: PluralEyes autosyncing softwarePluralEyes can automagically sync your multicamera shoots and music videos
As I was making my way around the show floor of NAB 2009 my friend Shane Ross said that I had to check out this tiny little booth over at the plug-in pavilion and demo this product called PluralEyes from a little company called Singular Software. My first thought was ... “PluralEyes, that’s an odd name.” Seconds later I headed straight to the booth. Automatic synchronization without timecode. Is this for real? It is. NAB’s plug-in pavilion is a large booth sub-divided into smaller spaces where some of the smaller creators of software-based plug-ins can exhibit without the high cost of renting larger NAB floor space all by themselves. The plug-in pavilion is where vendors like Red Giant Software, Automatic Duck and CoreMelt (to name a few that I visited) all setup shop. There was also Bruce Sharpe and his company Singular Software who had a tiny space facing the convention center wall, a small vinyl banner, a couple of computers and a killer product. As I watched the demo of PluralEyes in action I immediately had flashbacks to multicam concert edits of the past and how this little application would have made life much easier. Syncing multiple cameras isn’t really that difficult after you get the hang of it and the occasional 4, 6 or 8 camera event can be ready to edit without too much difficulty in a minimal amount of time by an experienced “syncer.” But then I thought about a 26 camera behemoth that once took us about as long to sync as it did to edit. Oh how PluralEyes would have been helpful there. That show was cut on Avid but my mind immediately started devising ways of how using PluralEyes to get timecode numbers could have at least got us in the ballpark and saved a lot of time. That is until the day when PluralEyes might be available for Avid Media Composer. After that I thought of an editor named Neal Usatin and how if he had had a copy of PluralEyes he could have quickly set up his massive edit and thought: Awesome: PluralEyes helped me f******g sync that. But then the NEXT thing that popped into my mind was how this little application could help in the syncing of music videos:
Bruce sent me a copy of the software to try out and I thought syncing music videos would be a great test. A video is a different type of sync-beast than a multicamera concert. Instead of 2, 4, 6, 8, 22, 24, 26, or 28 different cameras to sync you often have 52, 54, 56, 58 + angles to sync. I say + as that number can move to the triple digits. A beast indeed. Unlike a concert where all of the cameras have essentially the same audio, often at just a different proximity to the camera, a music video can have audio anomalies (to say the least) as the camera is moved closer to the singer or the drummer for instance. They will usually be performing lip sync-style to the onset playback but that camera’s mic will often be recording the singing of the singer or the banging of the drums as well as the playback. That could conceivably cause some problems for anything that is dependent on the captured audio. More on that in a bit. The idea behind PluralEyes is that it “listens” to the audio that has been captured with the video and then lines all of the video clips up, in sync, in a new Final Cut Pro timeline. Just like an assistant editor would do (if you have one)! If it can’t figure out where a clip should fall then it places those clips into an unsynced timeline:
With that unsynced timeline the editor has to resort to old old-school eyeball syncing. It does all of this in what is not at all an unreasonable amount of time. All the editor has to do is place all of the clips to by synced (both the audio and video) onto their own tracks in a single FCP timeline titled pluraleyes (as in the 38 layer timeline above), launch the PluralEyes application, choose your settings and then wait for the task to complete. PluralEyes, an ideal companion for music video
As my use of PluralEyes has thus far been limited to music videos then that’s what I’ll talk about here. The first couple of attempts using version 1 of the software, to be quite honest, didn’t work very well. If you think about the audio that is happening on a music video shoot it can be quite a cacophony of sound. There’s the official playback of the band’s track that is being lip synced to by the band and then there’s the sound that the band is producing (singing, guitars and especially drums) as they lip sync along with the song. Then take into account the commands that might be shouted from the director as well as the volume of the sounds as a handheld or camera dolly moves closer to and further away from the band and you can see where it might confuse PluralEyes. But one of the advantages of working with software from a small developer like Singular Software is they are often very responsive to questions, suggestions and complaints from the user. As I was trying to make PluralEyes work with my music video edits I was in contact with Bruce Sharpe, PluralEye’s creator. Describing what I was tying to sync, Bruce was confident that it should work. I sent him several examples of the material I was working with and in return PluralEyes received some minor updates and added a few new features. These features proved to be the missing link in working with these extreme cases. Next: PluralEyes is updated and begins to work its magic (Page 1 of 2 pages for this article 1 2 >) 
You must be registered to comment. This is an effort to reduce spam. Please REGISTER HERE. |
|
||||
Partner Text Links
