I recently had the opportunity to interview Ryan McMaster with Volant Productions and his Freefly Systems CineStar Heavy-Lift Octo with dual operator controls with the MOVI M5 gimbal. Oh. Em. Gee!
The Freefly Systems CineStar 8 is a heavy-lifter Octocopter that’s capable of carrying about 20lbs – which means a sizeable fully-controllable gimbal (like the MOVI M5) with a full-frame camera and lens. Ryan McMaster from Volant Productions in Reno, NV brought his system out for us to do a demo of just what it’s like to operate one of these high-end UAVs used in film and commercial aerial video production. Ryan is also in the process of getting his Section 333 Exemption with the FAA to be allowed to use his gear on commercial productions and will be sharing his application experience with us in another article/video very soon.
CineStar 8 Configuration:
Pilot Radio: Graupner MC-32
Gimbal Radio: Spektrum Dx7s
Frame: CS8 HL frame
Gimbal: MOVI M5
Camera: Sony A7s
Video links: Iftron 500mW transmitter, Diversity Receiver, Teradek Bolt Pro
Antenna: Helical antenna and RHCP antenna
Batteries: 10,000 mAh 6s packs
Flight Controller: 2.5 ME
GPS: Navi Controller and GPS Unit
BLctrl: BL3.5 redundant
Props: Tiger 15×5 CF props
Motors: Tiger 4012 480 KV
Camera Accessories (Lockport): Plate and Lockport
Lens selection: Sony 10-18, Sony 35, Rokion prime set
Lens adapter: Metabones FE->EF V4
Monitors: Small HD AC7, Black Pearl
Video Demo and Interview with Ryan McMaster:
As Ryan always stresses safety, support and practice, practice, practice! He and his team have learned from their experience what kind of system will not let them down and what to do when things can go wrong with the technology. It’s also a matter of pre-flight checks, maintenance and taking your time getting yourself and your gear up in the air.
“It’s not a matter of IF bad things might happen, it’s only a matter of WHEN – so you have to be prepared and have redundancy built into your system to allow you to bring it home safely.”
Here’s a safety check pre-flight procedure video that Ryan performs before each day’s flying/shooting:
Here’s another configuration on the MOVI M5 gimbal with the Phase One iXU camera:
For more information about Ryan’s company and their services, visit the Volant Productions website.
Photo & Video Credits: Terrence Williams & Jeff Foster
Production and flight assistance: Ross Robinson
_____________________________________________________________________________________
Jeff Foster is a published author of several how-to books and training videos in the motion graphics, animation and video production industries and is an award-winning video producer and artist. Visit his web site to learn more about his training methods, tips & tricks at PixelPainter.com